Brewer Classic Lincoln

Shipping class: Medium

For medium items (between 0.5 and 3 lbs) requiring higher postage

  • 1961 1962 1963 Lincoln Convertible Trouble Diagnosis Poster 59″ x 35″

    1961 1962 1963 Lincoln Convertible Trouble Diagnosis Poster 59″ x 35″

    1961 1962 1963 Lincoln convertible top trouble diagnosis poster. Size 59″ x 35″, printed on vinyl banner material. This can be hung for display, or can be laid out on the hood of your Lincoln for reference while working on the top. Water, tear and stain resistant.

    This poster provides clear, crisp, step by step diagnostic and reference information that is not provided in any other Ford/Lincoln printed resource.

    Production of the poster involved complete resetting of all type, correction of numerous typographic errors found on the original, and correction and updating to reflect what has been learned and refined over the last 50 years of working on these cars.

    This large poster was originally hung in Lincoln service bays.

    This poster was provided to Lincoln dealerships to be hung on the wall for reference while fixing the convertible tops.

    The poster has clear, crisp, readable text and clear illustrations.

    This poster names all of the relays, switches, hydraulic components, and goes so far as to identify wire colors on the switches. FABULOUS!
    Although similar information is presented in various manuals, none of those presents the high detail, specific trouble shooting information, and certainly not on a single page format for easy reference.

    I personally use these posters when consulting with my clients on their convertible top problems.

    Having one of these WILL HELP SIGNIFICANTLY IN DIAGNOSING AND FIXING TOP PROBLEMS

    Perfect for your office, man cave or garage wall. No frame required.

    NOT AVAILABLE FROM ANY OTHER VENDOR

     

  • 1964 1965 1966 1967 Lincoln Convertible High Torque Flap Motor –

    1964 1965 1966 1967 Lincoln Convertible High Torque Flap Motor –

    This is an upgrade replacement to the existing factory motor that powers the flipper panel / upper back panel / flap to go up and down.

    This beefy replacement has more than enough power to make the flap go up, unlike the original wimpy version.

    Mounts identically to the original. A 2.5″ x .25″ piece of the flap gear drive mounting base MAY need to be removed to allow this to seat properly. About 5 minutes with a Dremel will remove this, and will not be noticeable once the motor is reinstalled.

    I need your original motor as a core. Please send it back to me.

    John Brewer